Run System Ergo Pro
With the Run System, the size of the helmet can be individually adjusted on all Alpina helmets via a smooth-running dial. A striking feature of the high-quality Run System Ergo Pro are the two large wing-shaped headrests. They are made of a two-component mix consisting of plastic and rubber. This guarantees maximum comfort. Since 2014, the Run System Ergo Pro has been available in colours to match the helmet.
A helmet can only provide the best possible protection if it remains in the optimum position in the event of an impact. The adjustment and fixation of the two straps under the ear plays a decisive role. The Y-Clip system guarantees millimetre-precise adjustment - in a matter of seconds.
Proven hundreds of thousands of times and used on all Alpina helmets: the belt buckle with the red push button and multi-stage automatic snap-in mechanism. Ergomatic can be operated with one hand - you can loosen the strap uphill, tighten it downhill - and in the event of a fall it is not possible for the locking mechanism to open automatically.
Edge Protect is an additional polycarbonate sheet that refines Inmold helmets. It covers edges on the underside of the helmet. This protects the Hi-EPS and increases the longevity of the helmet. At the same time, the neck and shoulder area of the rider is protected against injuries from the helmet in the event of an impact and contact with the lower edge of the helmet.
One factor that strongly influences the wearing comfort is the ventilation of the helmet. The strategically sensible arrangement of the ventilation openings is decisive for optimum ventilation of the interior. The air is directed into the interior, directed along the head and can then flow out again at the rear. The head is therefore always pleasantly air-conditioned.
The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrene). The material has microscopically small air chambers which absorb the forces acting on the helmet in the event of an impact. Hi-EPS provides optimum protection and at the same time enables extra-thin wall thicknesses and narrow helmet shapes.
In the Inmold production process, the polycarbonate helmet shell is thermally bonded to the Hi-EPS inner shell of the helmet body under great heat and pressure. This creates a large-area and inseparable connection between the upper and lower shell. Advantage: The helmet is very light and at the same time extremely stable.
All Alpina helmets manufactured using the Inmold process receive a robust Ceramic Shell. A polycarbonate plate is stretched under high heat onto the shape of the later helmet and pressed under high pressure onto the Hi-EPS body and thermally connected to it. The Ceramic Shell is characterized by several qualities: It is break- and scratch-resistant, UV-stable and antistatic.
Custom Fit is an adjustment system at the back of the head that allows you to adjust the height of the Run System in several stages. This allows the optimum fit of the helmet to be adjusted for a wide range of head shapes. Pressure points are a thing of the past, the fit of the helmet is perfect and safety is increased.
Please note: We are only able to ship to Jersey, Channel Islands
If purchasing an American style fridge freezer or range cooker online and arranging delivery, please select your preferred delivery date and a member of the Powerhouse team will be in contact with confirmation of availability. As our delivery team for these larger appliances is sourced externally, we cannot guarantee your chosen date will be available but will liaise and confirm a date most convenient for you.
You are welcome to collect your purchase(s) at any time during Powerhouse opening hours from the Customer Collection Depot at Queens Road. Please allow up to 30 minutes to collect your order. Please ensure that you bring your order confirmation reference and photographic ID, i.e. passport, driving license or bus pass.
If you have a valid driving license you are welcome to use our courtesy van free of charge (subject to availability).
We cannot modify the delivery address entered at the time of your order.
If an order is placed online with a delivery address that differs from the card registered address we will carry out security checks to protect you from fraud.
In the event that you need to return anything, we're here to make things as easy and straight-forward for you as possible.
That's why we offer a 28 day no-fuss returns policy from the moment you receive your order.
All you have to do is return the item(s) to us in-store or we can arrange this on your behalf, usually within 5 days, at no cost. If the item is in pristine condition we will offer a full refund in the form of a Powerhouse gift card, or a replacement if preferred.
If you would like to return an appliance, simply call the team on 0800 048 8042 or email us firstname.lastname@example.org.
To find out more, please read our Terms & Conditions of Sale.
Products we're unable to cancel, refund or exchange
We cannot offer refunds or exchanges, unless faulty or not as described, on any of the following:
Where a product has been specially ordered for you, unless faulty, we're unable to refund or offer an exchange. We're unable to accept cancellations for these orders, unless within 48 hours of the order being placed.
For the return of any items where the packaging has been opened or damaged since purchase, a 20% restocking fee will apply.
This does not affect your statutory rights.